Applications

Chemical
Hazardous Materials
Oil and Gas

Hazards

Nuisance Odor
Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

Offers an inexpensive way to test the air for contaminants, so you can take the necessary measures to protect your health and that of your associates. Consists of a Kwik-Draw sampling pump and a box of detector tubes (two each). Each item can also be purchased separately.

Features and Benefits

For use with MSA detector tube pumps
Specific detector tubes packaged in groups for specific industry needs
Choices of industry action sets include agricultural, pulp and paper, pharmaceutical, petroleum, mining, synthetics, and semiconductor applications
All sets contain twelve tubes

Applications

Electric Utility
Fire Fighting
Hazardous Materials
Paper & Pulp

Hazards

Nuisance Odor
Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Features and Benefits

“Go/No Go” style
Detect nerve, blister, blood, and choking agents
A reliable method of testing more than 170 hazardous gases and vapors
Specialized kits are available for use in HazMat work and indoor air quality testing

Applications

BuAgriculture
Chemical
Construction
Domestic Preparedness
Electric Utility
Fire Fighting
Hazardous Materials
Mining
Nuclear
Oil and Gas
Paper & Pulp
Spray Painting
Welding

Hazards

Confined Space
Nuisance Odor
Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Principles of Operation

An accurate measurement is obtained because the sample draw procedure itself is controlled only by the specifications of the pump and the flow resistance of the detector tube.

Applications

Chemical
Construction
Electric Utility
Fire Fighting
Hazardous Materials
Mining
Oil and Gas
Paper & Pulp

Hazards

Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

The Gas-Tester II H Detector Tube Pump is set for action by compressing the bellows. A pump stroke is started by pressing the release button. When the sample (100ml) is drawn through the tube, the end-of-stroke indicator changes color.

Applications

Chemical
Domestic Preparedness
Fire Fighting
Gas Detection
General Industry
Hazardous Materials

Hazards

Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

The HAZMATCAD Plus Chemical Agent Detector detects both chemical warfare agents and selected toxic industrial chemicals (TICs). Both units are ruggedly constructed, compact and lightweight. They are also extremely easy to use, requiring no prior training. A single key press begins automatic sampling and analysis. Audible and visual alarm messages provide clear and simple alarm condition display. Offers self-diagnostic check during rapid warm-up, alphanumeric display with LED alarms and 8-12 hour operation with rechargeable lithium ion batteries. Vapor diffusion check source verifies system performance. RS 232 and IrDA communication ports store up to eight hours of data. The inlet design protects against dust and particulate. Kits include a battery charger, belt clip, two Sony long-life lithium ion rechargeable batteries, a waterproof carrying case, vapor check source and operating manual.

Features and Benefits

Designed for accurate, one-hand operation and consistent delivery of a sample draw volume of 100 ml
Includes state-of-the-art end-of-stroke indicator and stroke counter

Principles of Operation

Kwik-Draw detector tube pumps are designed for one-handed operation and consistent delivery of a sample volume of 100 milliliters (ml). An integral counter helps track the number of sample pumps.

Applications

Chemical
Construction
Electric Utility
Fire Fighting
Hazardous Materials
Mining
Oil and Gas
Paper & Pulp

Principles of Operation

Audible and visible warnings or alarms are activated when gas concentrations exceed two preset levels. A "Warning" (W) or low alarm is activated when a low concentration of chlorine dioxide is detected. A distinctive pulsing alarm is activated when a higher concentration is detected. This "High Alarm" can only be cleared when the concentration drops below the alarm set point.

Approvals and Standards

ETL (an OSHA NRTL); Class 1; Div. 1; Groups A, B, C and D.

Applications

Chemical
Hazardous Materials
Oil and Gas
Paper & Pulp
Water/Wastewater

Hazards

Nuisance Odor
Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

Offers convenient low-level chlorine dioxide monitoring in a variety of applications. Perfect for use in many industries, including chemical, food and beverage, HazMat, petrochemical, pharmaceutical, pulp and paper, semiconductor and water/wastewater treatment. The alarm has a 0-6 ppm measuring range, and with only three buttons the alarm is very easy to use. Weighing less than eight ounces and running on a commercially available nine-volt battery, it offers the user the ability to determine peak readings with the press of a button. For user safety, the MiniClO2 Responder Alarm has a specially designed, time-delay power button that must be pressed for five seconds to turn the power off, helping to prevent accidental shutoff during use. Features a lifetime warranty on most components.

Principles of Operation

Audible and visible warnings or alarms are activated when gas concentrations exceed two preset levels. A "Warning" (W) or low alarm is activated when a low concentration of chlorine is detected. A distinctive pulsing alarm is activated when a higher concentration is detected. This "High Alarm" can only be cleared when the concentration drops below the alarm set point.

Approvals and Standards

ETL (an OSHA NRTL); Class 1; Div. 1; Groups A, B, C and D.

Applications

Chemical
Hazardous Materials
Oil and Gas
Paper & Pulp
Water/Wastewater

Hazards

Nuisance Odor
Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

Offers convenient low-level chlorine monitoring in a variety of applications. Perfect in many industries, including chemical, food and beverage, HazMat, petrochemical, pharmaceutical, pulp and paper, semiconductor and water/wastewater treatment. The alarm has a 0-15 ppm measuring range, and with only three buttons the alarm is very easy to use. Weighing less than eight ounces and running on a commercially available nine-volt battery, it offers the user the ability to determine peak readings with the press of a button. For user safety, the alarm has a specially designed, time-delay power button that must be pressed for five seconds to turn the power off, helping to prevent accidental shutoff during use. Features a lifetime warranty on most components.

Approvals and Standards

Intrinsic Safety Approvals: Class I, Division 1, Groups A B, C and D. ATEX II 1 G EEx ia IIC T4. European EMC complies to EN50270.

Applications

Agriculture
Chemical
Construction
Electric Utility
Fire Fighting
Manufacturing
Nuclear
Oil and Gas
Paper & Pulp
Rescue
Water/Wastewater
Welding

Hazards

Confined Space
Gas Detection
Nuisance Odor
Oxygen Deficiency
Toxic Atmosphere - IDLH
Toxic Atmosphere Non-IDLH
Welding

Product Information

Detects CO, H2S or O2, and is ideal for use in confined space monitoring and for a variety of industrial applications. The durable design and simplified operation provide dependable monitoring in even the harshest environments. This unit features a large gas concentration display that is easy to read, even in low-light conditions, a replaceable sensor and battery, simplified autocalibration at the push of a button. The durable design withstands severe conditions and usage. The triple alarm system features piercing audio, quadruple ultra-bright visual and optional vibrating alarms. Strong, versatile clip designs keep the unit attached during the roughest use.

Applications

Agriculture
Chemical
Construction
Electric Utility
Fire Fighting
Hazardous Materials
Nuclear
Oil and Gas
Paper & Pulp
Water/Wastewater
Welding

Hazards

Confined Space
Gas Detection
Oxygen Deficiency
Toxic Atmosphere - IDLH
Toxic Atmosphere Non-IDLH
Welding

Product Information

Provides maintenance-free, 24-month monitoring of CO, H2S or O2. With a unique design and competitive price, it is the clear choice in single-gas detectors. Requires no field calibration, battery or sensor replacement. Spring and suspension attachment clips are standard, keeping the unit attached during even the roughest use. The unit can be worn inside or outside a pocket, as well as on the belt or helmet. A long-life lithium battery offers 33% more capacity than the competition. A numeric display with characters four times larger than the competition allows users to count down service life from 24 months with accuracy and confidence. Because the PULSAR Single-Gas Detector has a built-in gas-delivery adapter, no easy-to-misplace accessories are needed to conduct gas-response tests.

Applications

Chemical
Construction
Electric Utility
Fire Fighting
Hazardous Materials
Mining
Oil and Gas
Paper & Pulp

Hazards

Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

Makes the sampling process easier, allowing the user to preset the number of pump strokes (from one to 250). Intrinsically safe, the automatic pump works with all MSA detector tubes and can also be used as a sampling pump.

Applications

Chemical
Construction
Electric Utility
Fire Fighting
Hazardous Materials
Mining
Oil and Gas
Paper & Pulp

Hazards

Confined Space
Nuisance Odor
Toxic Atmosphere IDLH
Toxic Atmosphere Non-IDLH

Product Information

MSA's ventilation smoke tube kits are for use where controlled generation of visible smoke is desired in order to determine the velocity of slow-moving air currents and establish their direction and flow patterns in shafts, mines and tunnels. The kits can also be used in commercial buildings and industrial processing plants to determine velocity and flow patterns of heating, ventilating and air-conditioning systems.