Applications:

• Compressed gas

• Fuel and lubricant handling

• Steam transfer

• Hydraulic systems

Temperature Range:

• -65°F to 450°F (-54°C to 232°C) for continuous service.

• -100°F to 500°F (-73°C to 260°C) for intermittent service.

Standards:

• Meets or exceeds requirements of SAE 100R14.

• Accepted by the U.S. Coast Guard.

• PTFE meets FDA 21 CFR 177.1550

Hose Construction

• .030" plus wall smooth PTFE tube

• Innercore vertically extruded to maintain highest quality: of concentricity

• Manufactured from Dupont type 62 fine grade resin

• 304 stainless steel wire braid reinforcement

• R122 Hose has a precisely controlled amount of carbon black added to the PTFE innercore.

• This provides a continuous conductive path to the metal end fittings, to bleed off static electricity in steam or high flow-rate applications.

Vacuum Service (R115/122 & R101)

• Sizes -4 through -10 are rated for full vacuum.

• Larger sizes- 12 and above can be reinforced with an internal support spring for full vacuum service.

External Extruded Covers for R115/R122 Hose

• Sarlink

• Surlyn

• Hytrel

• Heat Shrink

• Armor

Applications:

• Compressed gas

• Fuel and lubricant handling

• Steam transfer

• Hydraulic systems

Temperature Range:

• -65 to 450 degrees F (-54 to 232 degrees C) for continuous service.

• -100 to 500 degrees F (-73 to 260 degrees C) for intermittent service.

Standards:

• Meets or exceeds requirements of SAE 100R14.

• Accepted by the U.S. Coast Guard.

• PTFE meets FDA 21 CFR 177.1550

Applications

• Used in very high performance service featuring pressure cycling while maintaining fatigue resistance.

Temperature Range

• -65°F to 450°F (-54°C to 232°C) for continuous service.

• -100°F to 500°F (-73°C to 260°C) for intermittent service.

IR101 HEAVY WALL TEFLON® CONDUCTIVE HOSE & FITTINGS

JIC-FEMALE SWIVEL (37° SEAT)

Hose Construction

IR101 utilizes a special virgin PTFE inner core that has been strengthened through additional post curing processes. This processing technology enables the R101 medium pressure hose to be used in very high performance service featuring pressure cycling while maintaining fatigue resistance. The PTFE tube also incorporates the Titeflex patented "ZS" zero static construction providing for effective dissipation of static charges.

The post-sintered .040" wall PTFE is recommended for gaseous transfer at elevated pressures. The wire braid is 304SS.

Applications:

• The ultimate transfer hose for a variety of high pressure applications

• R.I.M. Reaction injection molding machines

• Industrial gasses

• Hydraulic service with phosphate ester fluids

• Compressed natural gas

• Transfer of automotive sealants

Temperature Range:

• -65°F to 400°F (-54°C to 204°C)

• Consult factory for temperature- adjusted pressure ratings.

Application Advantages

• Design optimized for your specific application

• Manufactured in long lengths to reduce hose costs associated with coupling hose sections

• Economical and Cost Effective

UNI-BRAID high-pressure hose is the most economical high pressure PTFE hose product ever offered to the market. It combines long life expectancy, high durability, and proven performance for superior service and cost effectiveness over the long term.

Lightweight Design

When UNI-BRAID was being designed for use in the aerospace industry, the most critical challenge faced by engineers was to minimize weight. The hose had to be light and flexible, yet retain the strength and integrity necessary to withstand severe performance conditions. The result is an innovative, patented, single braid wrap that out performs all spiral-wire rubber hoses, as well as all other high pressure PTFE hoses.

Greater Flexibility

In industrial hose applications where high performance under harsh conditions is required, UNI-BRAID PTFE hose offers solutions and value. The patented UNI-BRAID® construction features a single outer layer braid that reduces bulk while maximizing pressure capability, and provides an exceptionally tight bend radius.

Hose Construction

R160 hose is made of conductive PTFE using "ZS" (Zero Static) construction, to bleed off static build-up in high flow applications and eliminate the risk of "static" burning of the core. The innercore is post-cured to enhance hose performance in extreme applications. Reinforcement of combined single plaits of small diameter, tiered, tension controlled type 304 stainless steel wire make up the braid jacket. This specially designed outer layer of braid eliminates conventional spiral wraps, reducing bulk without sacrifice of pressure capability. In larger sizes (12 thru 24) there is an additional braid layer between the PTFE innercore and the pressure carrying outer braid.

Applications:

• The preferred choice for high impulse hydraulic systems

• Ground support

• Capable of long service life at temperature/pressure extremes

• Molten plastics

• Steel mill concast lines

Temperature Range:

• -65°F to 400°F (-54°C to 204°C)

• Consult factory for temperature-adjusted pressure ratings.

R157 Hose Construction

R157 Offers a smooth innercore of extruded PTFE with a precisely controlled amount of carbon black added to the inner 15% of the core wall. This feature provides a continuous conductive path to the metal end fittings. Wire reinforcement is type 304 stainless steel. The 3/16" and 1/4" hose sizes have two layers of braid; 3/8" and 1/2" sizes have two layers of spiral wrap between two layers of braid: 5/8" through 1" sizes have four layers of spiral wrap between two layers of braid.

R154 Teflon® Hose

Applications:

• The preferred choice for high impulse hydraulic systems

• Ground support

• Capable of long service life at temperature/pressure extremes

• Molten plastics

• Steel mill concast lines

Temperature Range:

• -65°F to 400°F (-54°C to 204°C)

• Consult factory for temperature-adjusted pressure ratings.

R154 Hose Construction

R154 employs the same conductive innercore as the R 157. This product can offer 50% more pressure capability than the R157. Wire reinforcement is type 304 stainless steel. The 1/4" and 3/8" hose sizes have two layers of spiral wrap between two layers of braid; the 1/2" size has four layers of spiral wrap between two layers of braid.

R154 Hose

R154 hose fittings also utilize the exclusive Titeflex progressive swaging method of attachment; with positive braid lock. 

Materials

All JIC wetted surfaces are type 321 stainless steel; other parts are type 304.

272 Convoluted Teflon® Hose

Applications:

• Chemical processing

• Pulp and paper

• Foam packaging

• Turbine engine componentry

• Air compressor discharge

• Tire press

Temperature Range:

• -65° to 400°F (-54C to 204°C)

• Consult factory for dynamic flexing applications at temperature limits.

Standards:

• Accepted by U.S. Coast Guard. Meets FDA compatibility standards (PTFE).

R272 Hose Construction

R272- A white non-conductive PTFE liner, externally reinforced with PTFE impregnated fiberglass and a single steel wire braid..

R276 Convoluted Teflon® Hose

Applications:

• Chemical processing

• Pulp and paper

• Foam packaging

• Turbine engine componentry

• Air compressor discharge

• Tire press

Temperature Range:

• -65° to 400°F (-54C to 204°C)

• Consult factory for dynamic flexing applications at temperature limits.

Standards:

• Accepted by U.S. Coast Guard. Meets FDA compatibility standards (PTFE).

R276 Hose Construction

R276- The PTFE innercore has a precisely controlled amount of carbon black added to the PTFE innercore. This conductive PTFE core material provides a continuous conductive path to the metal end fittings to bleed off static electricity.

R285 Convoluted Teflon® Hose

Temperature Range:

• -65° to 400°F (-54°C to 204°C)
• Consult factory for flexing and vacuum applications at temperature limits.

Standards:

• Accepted by U.S. Coast Guard. Meets FDA compatibility standards (PTFE).

The R285/287 series hose incorporates a heavy wall PTFE (non conductive/conductive) innercore reinforced with an external stainless steel wire wrapped in the root of the convolution under the stainless steel braid. This additional wire reinforcement provides unmatched flexibility with the hoop strength necessary for use in full vacuum applications up to 28" Hg.

R285 Hose Construction

R285- Heavy-wall innercore of convoluted PTFE, externally reinforced with PTFE-impregnated fiberglass, a patented spring wire spiral to prevent collapse, and type 304 stainless steel wire braid.

*Kynar, Kevlar and Teflon are registered trademarks of DuPont.

Applications:

• Food processing

• Pharmaceutical

• Chemical processing

• Steam and hot oil transfer

Construction Features

• Teflon® open pitch convoluted innercore reduces product entrapment

• PTFE meets FDA 21 177.1550

• Non-stick Teflon® innercore is highly corrosion resistant

• Polyphenylene Sulfide (PSP) non-metallic braid provides continuous service up to 300°F

• Outer silicone cover is easily cleaned and provides thermal insulation barrier for operator protection

• Overall hose weight is ultra-light allowing ease of handling and quick installation

Applications:

• Sizes 1"/1-1/2" chlorine hose for rail car loading and unloading

• Titeflex 1/2" chlorine hose for replacing copper whips at chlorine repackaging plants filling 1 ton containers and 100/150 lb. cylinders

Temperature Range:

• -40°F to 120°F (-40°C to 49°C)

Construction

• Convoluted Teflon® cone with a double layer of Kynar® braid

• 1"/1-1/2" sizes are covered with a CPE jacket for abrasion protection.

• Spiral wrap Teflon® chafe sleeve is used on assemblies less than 3 feet in length

• Schedule 80 monel male pipe fittings

• Monel schedule MSS type A stub ends available for 1" size

• 1/2" size males have a press-fit Kynar liner/insert to prevent erosion.

SteamSafe Smoothbore Hose

Applications:

• Tire press

• Rubber Curing

• Pulp & paper

• Hot oil transfer

• Rotary joints

Hose Construction

• Smooth bore conductive PTFE tube eliminates static build up and unlike metallic hose resists vibration and heat induced fatigue

• Reinforced with type 304 stainless steel wire braid for operating pressures to 2000 psi

• External jacket is compounded to withstand

  • temperature extremes in excess of 500°

  • abrasion protection

  • improved flexibility

Construction

• Teflon® tube is reinforced with 304SS wire braid on the outside

• A unique anti-collapse/anti-kink inner spring for support of the PTFE tube

• Smooth outer silicone cover securely crimped in place at each end

• Optional outer stainless steel spring guard available

Application

Critical to the successful performance of all autoclaves used in the Aerospace Composites Industry are the many flexible hoses used inside the pressure vessel. Hoses must be capable of rapid connection to product material 'tray/dolly': not collapse under the full vacuum (28"-29" Hg) drawn on the lines, as well as withstand the external positive pressures exerted (typically plus 350°F): not absorb any moisture from adhesive vapor fumes; be flexible and sturdy enough to resist kinking when folded back along the sides of the chamber when not in use.

Features & Benefits

• Autoclave hose is inert to hot air and adhesive vapor fumes encountered for continuous operating temperatures to 450°F assuring long service life...

• Outer silicone jacket reinforces inner hose and reduces potential abrasion damage to expensive composite components...

• Retaining collar firmly holds the silicone jacket in place and provides a smooth transition to eliminate snagging at end fitting joints...

• Inner support offers outstanding resistance to collapse and kinking which minimizes downtime due to hose maintenance...

• Zero leakage design of entire assembly assures quality standards of the end product.