Applications

• Used in very high performance service featuring pressure cycling while maintaining fatigue resistance.

Temperature Range

• -65°F to 450°F (-54°C to 232°C) for continuous service.

• -100°F to 500°F (-73°C to 260°C) for intermittent service.

IR101 HEAVY WALL TEFLON® CONDUCTIVE HOSE & FITTINGS

JIC-FEMALE SWIVEL (37° SEAT)

Hose Construction

IR101 utilizes a special virgin PTFE inner core that has been strengthened through additional post curing processes. This processing technology enables the R101 medium pressure hose to be used in very high performance service featuring pressure cycling while maintaining fatigue resistance. The PTFE tube also incorporates the Titeflex patented "ZS" zero static construction providing for effective dissipation of static charges.

The post-sintered .040" wall PTFE is recommended for gaseous transfer at elevated pressures. The wire braid is 304SS.

QuikSwage® is a fast and reliable attachment method developed for R115 PTFE hose. QuikSwage fittings feature an exclusive progressive swaging method of attachment. The PTFE inner core and overbraid are firmly locked between the fitting collar and insert for a permanent, leak-proof assembly. The positive braid lock assures that strain is absorbed by the braid, not the PTFE core.

MALE PIPE	JIC FEMALE SWIVEL
ADAPTER- MALE JIC TO MALE PIPE	COMPRESSION TUBE END
FEMALE PIPE	SAE-FEMALE SWIVEL
SANITARY TRI CLAMP	TWO BOLT SWIVEL FLANGE

Our selection of fittings enhances the value, the areas of application and convenience of Titeflex convoluted hose. With these fittings. most installation needs are easily met. Please consult us for any designs not pictured here.

Convoluted hose fittings feature the exclusive progressive swaging method of attachment. The innercore and insert form a permanent, leak proof assembly. The positive braid lock assures that strain is absorbed by the braid, not the hose innercore, ensuring hose integrity.

Crimp Attachment

Convoluted fittings can also be attached to PTFE hose using numerous standard hose crimping machines. For information on this alternate method of attachment, please consult us.

Materials

Male pipe and female inserts are available in carbon steel and type 316 stainless steel. Collars for the preceding fittings are either carbon steel or type 304 stainless steel. Note: Carbon steel collars may be specified with stainless steel inserts, where only wetted surfaces require corrosion resistance.

Butt weld end fittings are type 316 stainless steel only; two-bolt flanges are carbon steel only.

MALE PIPE	JIC FEMALE SWIVEL
SANITARY FITTING	BUTT WELD END (CONTAINS VICTAULIC GROOVE)
TWO BOLT SWIVEL FLANGE	TWO BOLT SWIVEL FLANGE ADAPTER