"King" Combination Nipples
Purpose:
To provide hose
with a reusable end fitting in a wide range of styles, end
sizes and materials. The hose shanks of the threaded nipples
fit straight-end hose of the same size as the N.P.T. or are
available in jump sizes to meet your requirements.
Service:
Hose nipples,
made from tubular stock, to fit straight end hose. Threaded
end, in all styles, has male NPT thread-same size as hose;
i.e. 2” nipple has 2” thread and fits 2” I.D. hose.
Combination nipples are recommended for low pressure discharge
and suction service. The working pressure of combination
nipples varies with the size of the nipple, the size and
construction of the hose and the type of clamping system
used. The coupled length of hose, in any size should be
tested to 1-1/2 times the working pressure and held for 15
minutes without leaking or coupling movement. As a general
rule, these fittings are not recommended for pressures
exceeding 100 PSI on hose diameters 3” and over. Not intended
for use with compressed air.
Materials:
-
Non-porous
Tubular Steel
-
Plated
Tubular Steel
-
#316
Stainless Steel
-
Brass
-
Aluminum
-
“Tuff-Lite”
Nylon
-
Polypropylene
End Styles:
|
