Hi-Combat fire hose is part of a new technology of products designed to make firefighting safer and more efficient. Hi-Combat II, the second generation of aggressive interior attack hose has all the benefits of Hi-Combat, plus the added feature of the "IdentiFire" information system, allowing fire departments to permanently add their name and NFPA test information. In addition, Hi-Combat II is more flexible and has a higher burst pressure than the original Hi-Combat. Hi-Combat IIR was designed to address situations where the interior attack hose is used as a life line. With reflective material woven right into the hose, firefighters and civilians can follow the reflective Exit and Arrows to safety. Hi-Combat 2 ½" provides big flows supporting master streams and portable monitors. With all the benefits of traditional Hi-Combat including reduced friction loss, better abrasion resistance and better puncture resistance, it is the ideal big line for high-rise fire fighting.
 

Hi-Combat LDH is the family of rubber covered high pressure attack lines designed to meet the NFPA requirements for attack hose. These hoses in 3", 4", and 5" have all the benefits of a rubber covered hose and can be operated at pressures to 300 psi. They are ideal for situations such as supplying sprinkler systems and standpipes, as well as for aerial operations.
 

Hi-Combat LDH Lite is a family of hoses designed to be used in the mid-range of operating pressures. That area where 90% of the North American fire service operates. With operating pressures of 225 psi for 5" and 250 psi for 4", Hi-Combat LDH Lite gives the fire department that extra operating pressure while still maintaining a light weight/heavy duty hose.
 

Hi-Vol is a tough large diameter hose with the ability to deliver more water at a lower cost. But it doesn’t stop there. It is lightweight, compact and durable with a high resistance to oils, chemicals, ozone and heat. Its tough, high tensile cover and lining, permanently interlocked with the synthetic reinforcement, provide greater abrasion resistance while being snag-proof, kink resistant and it will not mildew or rot. The standard colors are yellow or red - call for other options.

Red Chief is a nitrile rubber covered fire hose that is ideally suited for municipal fire protection. Its synthetic jacket is completely protected and locked in by a rubber cover and lining for extra toughness and extra durability. The heavy rib construction makes the hose highly resistant to cuts, punctures, impact and abrasion. With a test pressure of 600 psi and a tolerance for temperatures from 1200°F to -35°F, Red Chief is clearly superior to all other conventional fire hose constructions. Its lightweight design is virtually non-kinking. The standard colors are red or yellow - call for other options.

Hi-Power is a lightweight, nitrile rubber, maneuverable hose designed specifically for fighting fires in high rise buildings. The lightweight rubber covered construction is heat and puncture resistant, kink resistant and has low friction loss. The rubber cover prevents water from penetrating the reinforcement thus minimizing the weight of the hose when in service. The standard color is blue.

Angus Premier - Nylon Rubber Lined Hose

Angus Premier is constructed of high strength, low stretch entangled filament polyamide/Cordura nylon 6-6
fibers over a rubber, ozone proof, E.P.D.M tube. The outer jacket is impregnated with Hypa-lock for additional
moisture and abrasion resistance. Angus Premier meets MIL Spec 24606A. Various colors are available.

Angus Premier-Lite - Nylon Urethane Lined Fire Hose

Angus Premier-Lite utilizes high strength, low stretch entangled filament polyamide/Cordura nylon 6-6 fibers,
to produce a highly abrasion resistant lightweight hose. The high tech thermoplastic lining also contributes to
reducing the overall weight of the hose. The standard Hypa-lock .impregnation reduces water pick-up and
increases abrasion resistance. Premier-Lite’s lining meets the NSF (National Sanitation Foundation) Standard
14 for potable water and has a tensile strength over 5000 psi

Angus Ultima - Polyester Rubber Lined Fire Hose

Angus Ultima is the ultimate in quality, municipal grade fire hose. This durable, double jacket hose is constructed of 100% high tensile strength spun polyester yearns, both warp and filler, and lined with a high tech E.P.D.M. tube. Its engineered design guarantees minimum weight with maximum durability, flexibility and abrasion resistance. The standard color is white. A Hypa-lock impregnation is available as well as a variety of colors.

Angus Ultima-Lite - Polyester Plastic Lined Fire Hose

Angus Ultima-Lite is a lightweight hose that utilizes a thin, high tensile thermoplastic lining to minimize weight. Both inner and outer jackets are constructed of spun polyester warp yarns and filament polyester filler yarns. Hypa-lock impregnation is offered as an option. Ultima-Lite’s lining meets the NSF (National Sanitation Foundation) Standard 14 for potable water and has a tensile strength over 2000 psi. U.L. Listed.