Everything you need is contained in one package that attaches to the end of your 1" fire hose. The PRO/pak has a high impact 2.5 gallon foam reservoir with a built in eductor that can be set to the ratio of foam or wetting agents used. A large easy-open fill port has an indicator to show the type of liquid in the tank. The flow is controlled by a twist grip valve/carrying handle. Select the discharge velocity that meets your needs for inlet pressures between 40 and 500 psi. The nominal flow is 12 GPM at 100 PSI. A shoulder strap is included for extended operations. The PRO/pak Portable Foam System is supplied with three different quick connect nozzles, a discharge hose and a cap. The straight stream nozzle gives maximum reach and penetration. The low expansion nozzle works well with Class A and B foam solutions where reach is more important than expansion ratio. The medium expansion nozzle produces dense foam that is best for vapor suppression and longevity. Use the PRO/pak when time is critical, and you need a small blanket of foam. For example: With one tank of 1% concentrate the PRO/pak can make 15,000 gallons of finished foam using 250 gallons of water in 21 minutes, based on 60:1 expansion from the medium expansion nozzle. High impact engineering plastic with metallic components of hard anodized aluminum and stainless steel. This product is covered by a 2-year warranty.

PRO/PAK FOAM SYSTEMS

• UM12 - PRO/pak Foam System 12 GPM, 1" NH COUPLING

• UM12-ID - PRO/pak Foam System 12 GPM, 1" NPSH THREADS

• UM12-IF - PRO/pak Foam System 12 GPM, 1.5" NPSH ANGLED COUPLING

• UM12-NF - PRO/pak Foam System 12 GPM, 1.5" NH ANGLED COUPLING

PRO/PAK NOZZLES

• U-SS12 - Straight Stream Nozzle

• U-LX12 - Low Expansion Nozzle

• U-MX12 - Medium Expansion Nozzle

PRO/PAK ACCESSORIES

• U-PN12 - PRO/pak Piercing Nozzle

• U-B - PRO/pak Storage Bracket

• U-STRAP - PRO/pak Waist Strap

• U-HOSE-BD - 50 FT/1" HOSE, 1" BSP

• U-HOSE-ID - 50 FT/1" HOSE, 1" NPSH

• U-HOSE-ND - 50 FT/1" HOSE, 1" NH

• U-HS - Short Outlet Hose

• U-HS12 - 12 Foot Outlet Hose

• U-HS25 - 25 Foot Outlet Hose

• U-HS6 - 6 Foor Outlet Hose

Make this your automatic a high performance foam nozzle with the FOAMJET air-aspirating attachment. Simple, rugged and dependable, the FOAMJET can be quickly attached to either the Handline, Dual-Force or Ultimatic 125 series of nozzles. The FOAMJET provides superior foam-making ability with most modern foam concentrates. When used with AFFF, the FOAMJET can develop expansion ratios of 8:1. This thick foam blanket has better extinguishing ability and is longer lasting than foam from non-aspirated nozzles. It can be easily removed in seconds for a water-only or non-aspirated stream. FoamJet is used in straight stream position only.

• FJ-U

• FJ-H

The FOAMJET-LX is a lightweight, low expansion foam-making, air-aspirating attachment. Simple, rugged and dependable, the FOAMJET-LX can be quickly attached and provides superior foam-making ability with most modern foam concentrates. When used with AFFF and Class A Foams, the FOAMJET-LX can develop a thick foam blanket which has better extinguishing ability and is longer lasting than foam from non-aspirating nozzles. The FOAMJET-LX can easily be removed in seconds for a water-only or non-aspirated stream. FOAMJET-LX is used in straight stream position only.

• FJ-LX-HM

• FJ-LX-M

• FJ-LX-FQ

The MX-FOAMJET is a simple, lightweight multi-expansion foam-making attachment for Handline, Dual-Force and Ultimatic 125 nozzles. The MX-FOAMJET allows for a wider selection of foam concentrates to be used, and has the unique ability to vary the expansion ratio and the stream reach of the finished foam. As the nozzle shaper is rotated to the wide fog position (counterclockwise), higher expansion ratios will be produced, but with reduced stream reach. Rotating the nozzle shaper forward to straight stream (clockwise) will produce lower expansion ratios, but with increased stream reach. The ability to regulate the reach and expansion ratio is unique to the MX-FOAMJET. It can be easily removed in seconds for a water-only or non-aspirated stream.

• FJ-MX-D

• FJ-MX-DQ

• FJ-MX-F

• FJ-MX-FQ

• FJ-MX-HM

• FJ-MX-FT

• FJ-UMX

• FJ-HMX